Contractors in Gem County store equipment between jobs in a locked unit they can drive right up to, sized for their longest piece, with access any hour so the crew can load out early. A steel 8x40 holds machinery and full length materials; an 8x20 is enough for tools and smaller gear.
SYS Storage rents steel storage units at 620 E Locust St in Emmett, Idaho, open 24/7 with gate code entry.
Here’s how to set it up so your gear is safe and the next job starts on time.
What size unit does a contractor need?
Size the unit to your longest piece, not your total pile. Lumber, pipe, ladders and scaffolding decide it far more often than boxes do.
| Unit | Good for | Price at SYS Storage |
|---|---|---|
| 8x20 | Hand tools, power tools, a generator, job boxes | $90 a month |
| 8x40 | Machinery, scaffolding, full length materials up to about 39 feet | $135 a month |
If you run more than one crew, two 8x20 units can keep each crew’s gear apart. See our 8x40 large units and 8x20 medium units, or read how much fits in a 40 foot container.
Why not leave equipment on the jobsite?
Gear left on an open site overnight is easy to take and hard to watch. Weather is the other problem: rain, snow and sun wear out tools and materials fast.
A locked steel unit near home base solves both. Load out in the morning, lock up at night, and nothing sits exposed over a weekend.
How do I load a unit so the crew can work fast?
Put what you use every day at the doors and what you use once a month at the back. A few habits help:
- Keep a clear lane down the middle so nobody climbs over gear.
- Stand long materials along one wall.
- Put small tools in labeled bins on shelves.
- Park heavy pieces where a dolly or a ramp can reach them.
At SYS Storage you back your truck or trailer right up to the doors, and the wide aisles leave room to turn.
When can my crew get in?
Any time. Contractors start early, so a unit with office hours slows the whole day.
SYS Storage is open 24/7 with a gate code, so your crew can load out at 5 AM or drop gear after dark.
How do I protect tools from weather and theft?
Start with a solid steel unit and a good lock, then store things clean and dry. Check:
- Is there a code at the gate?
- Is the unit steel, and does it seal tight?
- Is the owner local and easy to reach?
SYS Storage units are weathertight steel, but they are not climate controlled, so dry wet tools and tarps before you lock up. Read secure self storage in Emmett for more.
What do renters say?
Brandon summed it up in his Google review: “Excellent experience, clean, secure and simple.” That’s what a crew needs from a place to keep its gear.
When to call before you rent
You can pick a size on your own from the table above. Call or text first if you have a trailer load to bring in, a piece longer than about 39 feet, or you want to check what’s open before you drive over. A quick call saves a wasted trip. When you’re ready, you can reserve a unit online.
Frequently asked questions
What size storage unit do contractors need?
Most crews pick an 8x40 for machinery, scaffolding and long materials, and an 8x20 for tools and smaller gear. Measure your longest piece first.
Can I get to my equipment early in the morning?
Yes. SYS Storage is open 24/7 with gate code entry, so you can load out before sunrise.
How much does equipment storage cost at SYS Storage in Emmett?
An 8x40 is $135 a month and an 8x20 is $90 a month. Military, veterans, law enforcement, firefighters, EMTs and first responders get 10% off.
Do the units stay at SYS Storage?
Yes. The units stay at 620 E Locust St in Emmett. You drive up, load your gear, lock it and go.
Store your gear at SYS Storage
SYS Storage serves contractors across Gem County from 620 E Locust St in Emmett, with steel units you can drive right up to, open 24/7. Call or text (208) 963-1451 to check what’s open, or reserve a unit. See every option for crews on our heavy equipment and contractor storage page.
